CerePlex E256

With an astounding 256 individually addressable channels, the CerePlex E256 offers unmatched recording capability.

CerePlex E256

Features

Durable and High Channel Count

The CerePlex E256™  is a 256-channel digital headstage accessory that serves as a compact interface connecting electrodes that are bonded to a Blackrock CerePort pedestal to the Cerebus or CerePlex Direct data acquisition systems. At the recording site, the CerePlex E256™ performs analog-to-digital signal conversion, which can minimize signal noise introduced during transmission to the recording system.

CerePlex E256 Comparison

Lightweight and Small

The CerePlex E256 delivers high-quality digital signals in a smaller and lighter form-factor.

High Resolution, Low-Noise, & Dynamic Range

The CerePlex E256 converts analog signals to digital proximal to the recording site using the Honey Badger ASIC chip, This provides extracellular spikes and local field potential data that’s 7x higher resolution*.

*Compared to competitors’ 12 Effective Number of Bits 2.44 μV vs. Blackrock’s 15.5 Effective Number of Bits 0.353 μV.

NeuroPlex E Comparison
CerePlex E256

Wide Input Range, Reference Selection & Impedance Mode

The CerePlex E256 can record a wide input range allowing researchers to record from a wide variety of electrodes including ECoG, SEEG, Micro-Macro Electrodes, and the Utah Array.

Take your research to the next level with the CerePlex E256™
Whether it’s setup, customization, general inquiries, or regulatory assistance, our expert team is here to assist you at every step.

Specs

Spec
Number of Channels 256
Dimensions L 24.9 mm x W 35.4 mm X 17.9 mm
Resolution 16-bit, at 250 nV per bit resolution
Compatible Array Utah Array
Sampling Frequency 30 kS/s
Input Impedance 1300 MΩ @ 10 Hz, 13 MΩ @ 1 kHz
Auto Impedance Measurement Range 15 kΩ - 1 MΩ
Normal Band Filters 0.3Hz (1st order) - 7.5Hz (3rd order)
Wide Band Mode 0.02 Hz (1st order) - 10 kHz (3rd order).
Maximum Input Range +/- 8.192 mV with respect to reference